基于Ansys Icepak 的负载器热设计与热分析

基于热设计的基础理论与负载器的工作原理，应用Ansys Icepak仿真软件对供配电负载器工作过程中内部散热情况进行仿真，找出负载器内部温度最高部位，指导实际测试，避免实际测试的盲目性。另外，通过优化负载器散热孔设计，降低负载器温升值。     

SSPS-OMEGA超大型球形聚光器结构拓扑构型与设计

为同时兼顾千米量级尺度空间太阳能电站聚光系统的在轨发射安装难度、光学收集效率、稳定性及结构工艺等多方面的因素，提出采用基于球面正多面体的经纬线划分法模块化构建球形聚光器。该方法不仅可实现基础划分单元分布均匀、规格种类少，降低在轨构建与运载发射难度。而且只要合理控制弧高等分数和基础划分单元的口径就可以同时保证聚光系统的光学收集效率。理论与仿真结果显示，当弧高等分数为24时，该划分法共有25种基础单元件，整个球面被分成5762块。并且此时模块化构建的实际球形聚光器的光学收集效率与理想球面相比基本保持不变，解决了太阳能电站聚光系统设计中存在的关键问题。     

基于纹理边界检测的航天器椭圆特征提取方法

为确定失效航天器等非合作目标的相对位姿，提出一种通过纹理边界检测的椭圆特征提取方法。该方法假设椭圆特征是航天器表面两种不同纹理的边界，利用上一时刻相对位姿信息，将对接环离散几何模型投影到像平面，并沿各离散点的法向方向通过概率方法检测纹理边界点。利用随机抽样一致(RANSAC)方法剔除边界点中的粗大误差，进而拟合出椭圆参数。纹理特征对光照变化具有鲁棒性，因此该方法能够在变光照、星体表面反光不均匀等复杂情况下快速准确地提取图像中的椭圆特征。本文以对接环图像特征提取为例进行仿真校验，分析了算法参数和噪声对提取椭圆精度和时间的影响。利用真实图像与基于梯度边缘的椭圆提取方法进行对比，结果表明，所提出的算法具有较高的精度和速度。     

基于深度学习的毫米波和亚毫米波成像仪的图像增强技术

风云四号卫星毫米波和亚毫米波成像仪(MMSI)数据根据采样方式分为过采样和非过采样数据。由于采样方式的影响,非过采样数据在采样过程中会有一定的信息损失。为解决采用简单的线性插值方法做精细化处理时提升精度有限问题,采用基于深度学习的方法增强MMSI亮温图像,设计卷积神经网络重建风云四号卫星MMSI的亮温图像和风云三号卫星微波成像仪亮温图像。实验结果显示:相比传统的双三次插值方法,在风云三号卫星微波成像仪亮温图像样本上峰值信噪比提升了1.13dB,结构相似度提升了0.01。实验结果表明:对于非过采样亮温数据,采用基于深度学习的方法增强图像具有更高的精度,同时可在其他微波探测仪数据中使用,具有很强的普适性。     

Inverse identification of constitutive parameters of Ti2AlNb intermetallic alloys based on cooperative particle swarm optimization

Ti₂AlNb intermetallic alloy is a relatively newly developed high-temperature-resistant structural material, which is expected to replace nickel-based super alloys for thermally and mechanically stressed components in aeronautic and automotive engines due to its excellent mechanical properties and high strength retention at elevated temperature. The aim of this work is to present a fast and reliable methodology of inverse identification of constitutive model parameters directly from cutting experiments. FE-machining simulations implemented with a modified Johnson-Cook (TANH) constitutive model are performed to establish the robust link between observables and constitutive parameters. A series of orthogonal cutting experiments with varied cutting parameters is carried out to allow an exact comparison to the 2D FE-simulations. A cooperative particle swarm optimization algorithm is developed and implemented into the Matlab programs to identify the enormous constitutive parameters. Results show that the simulation observables (i.e., cutting forces, chip morphologies, cutting temperature) implemented with the identified optimal material constants have high consistency with those obtained from experiments, which illustrates that the FE-machining models using the identified parameters obtained from the proposed methodology could be predicted in a close agreement to the experiments. Considering the wide range of the applied unknown parameters number, the proposed inverse methodology of identifying constitutive equations shows excellent prospect, and it can be used for other newly developed metal materials.     

考虑探测构形的多飞行器协同探测与制导一体化设计

针对多飞行器协同拦截机动目标时几何构形会影响协同探测和制导效果的问题，基于最优控制理论提出一种考虑探测构形的协同探测与制导一体化设计方法。基于飞行器相对运动学、动力学方程和双视线协同探测原理，建立了协同拦截模型。在制导设计中引入视线分离角参量以调制协同探测几何构形、减小相对距离探测误差，从而在制导全程增强协同探测效果。将相对距离协同探测结果应用到剩余时间和制导律解算中，基于最优控制理论实现协同探测与制导环节一体化设计。仿真结果表明：在目标进行不同程度机动的情况下，与修正比例导引律相比，所提方法在协同探测和制导方面均具有明显优势。     

An improved numerical method for constructing Halo/Lissajous orbits in a full solar system model

An improved numerical method that can construct Halo/Lissajous orbits in the vicinity of collinear libration points in a full solar system model is investigated. A full solar system gravitational model in the geocentric rotating coordinate system with a clear presentation of the angular velocity relative to the inertial coordinate system is proposed. An alternative way to determine patch points in the multiple shooting method is provided based on a dynamical analysis with Poincare′sections. By employing the new patch points and sequential quadratic programming, Halo orbits for L_1, L_2, and L_3 points as well as Lissajous orbits for L_1 and L_2 points in the EarthMoon system are generated with the proposed full solar system gravitational model to verify the effectiveness of the proposed method.     

Last FY-2 Series Satellite Successfully Launched on A LM-3A

正A LM-3A launch vehicle lifted off from the Xichang Satellite Launch Center at21:07 Beijing time on June 5,launching the FY-2H satellite into orbit.This was the 277th flight mission of the LM family launch vehicle.FY-2H was the last flight unit of the     

密封舱内漂浮小球运动规律的数值模拟研究

"天宫二号"空间实验室开展了首次人机协同在轨维修技术试验,机械臂操作终端抓取漂浮小球试验为在轨试验任务之一。为研究漂浮小球与机械臂操作终端运动特性之间的匹配性,文章建立了在轨微重力环境下小球运动的物理模型与数学模型,采用动网格方法对不同小球的运动特性进行数值模拟,得到小球的运动规律,由此确定小球的设计参数范围,作为机械臂操作终端系统方案设计的依据。最终,数值模拟结果与"天宫二号"空间实验室在轨试验数据的对比初步验证了该计算结果的正确性。     

主辅拦截器协同制导方法研究

随着现代导弹技术的发展,导弹的突防能力越来越强,对导弹的防御难度也逐渐增大。为增强拦截器的杀伤力并降低成本,可利用主辅拦截器协同制导对目标进行拦截。建立了拦截器与目标的相对运动模型,通过对运动方程进行线性化分析,发现协同制导问题实质为具有终端时间限制条件的导引问题,该问题可转化为线性化系统的最优控制问题。利用最优控制中的极小值原理设计了时间协同制导律。仿真结果表明:该制导律可实现多枚拦截器在同一时刻拦截目标的协同制导要求。